Every technician is IICRC certified and has handled hardwood floor water damage many times. You get a clear plan before any work starts.
Filing a claim is easier with good records. We document everything and talk to your adjuster for you.
We look at the damage, explain what it needs and give you a written price before we start.
Most people who call us have never dealt with hardwood floor water damage before. We walk you through it on the phone, then send a local crew with the right equipment.
Hardwood responds fast when it gets wet. As the wood absorbs water along its edges and bottom face, it expands, crowds the neighboring boards and cups, leaving the center lower than the sides. A floor in this condition is not necessarily ruined. Boards of solid wood often return to flat if they are dried during those early days. The key is pulling moisture out of the boards and the subfloor underneath at a steady, controlled pace.
We dry hardwood with floor drying mats. The mats are sealed to the surface and connected to a vacuum unit that draws moisture up through the boards and seams, while dehumidifiers keep the room air dry. This takes longer than drying carpet or drywall, often a week or more. No sanding should happen before the wood has dried completely. If cupped boards are sanded while still wet, crowning shows up down the road.
We save what can be dried properly and remove only what cannot. Moisture readings make that call, not guesswork.
Call (239) 268-6506| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Floor finish | Light clouding that clears or buffs out once dry | Finish that peels or is stained, requiring sanding and new coats |
| Baseboards and shoe molding | Solid wood trim that dries straight and can be reinstalled | MDF baseboard or quarter round that swelled at the bottom |
| Engineered hardwood | Planks wet only briefly on the surface, edges still tight | Any plank peeling into layers, puffed at edges or damp beneath |
| Plywood subfloor | Plywood that stayed firm and level and meters normal after drying | Delaminated plies, spongy areas or mold you can see |
| Paper or felt underlayment | Rosin or felt paper that dries along with the boards above it | Wet layers uncovered during board removal or showing growth |
The subfloor can hold moisture long after the boards feel dry. Leave it wet and the cupping returns or mold grows up from below.
Between the boards and the subfloor there is only darkness and still air. You will smell it before you see it, because nothing shows on the surface.
Sanding cupped boards flat while they are still wet removes the raised edges. When the wood finishes drying, the centers end up high and the floor is crowned.
Staples and flooring nails corrode when moisture lingers, and their grip weakens. The rust also bleeds into the wood as dark stains that sanding may not remove.
Our team meters the wet boards, the subfloor under them and a dry area of floor to compare against. The comparison shows how far down moisture reached and how likely the floor is to recover.
Standing water is extracted right away and rugs and furniture are moved off the wet area. Cutting off the water entering the joints early keeps swelling down.
Floor mats are taped down and connected to a vacuum system that pulls moisture up through the boards. The room is managed with dehumidifiers so drying stays even and the boards do not crack.
We track readings every day or two until boards and subfloor match dry reference areas. Then we tell you whether the floor needs refinishing, a few boards replaced, or nothing.
Water slips through the seams and spreads between the boards and subfloor. You can towel off the top and still have a saturated underside.
Swelling sets in and board edges lift. Finish may turn cloudy. Growth is able to begin below, on raw wood and on the subfloor panels.
Swelling builds pressure across the floor. Boards crush against each other, fasteners loosen and sections can begin to lift off the subfloor.
Expect a good chance of mold below, dark staining and boards that have buckled. By now replacement, not drying, is the answer for most of the affected section.
Not seeing your question? Call and ask. It costs nothing to talk it through.
Call (239) 268-6506Don't wait for small problems to become expensive emergencies. Call Staten Island Restoration for fast, reliable service.
Call (239) 268-6506 Now